What
does the XENON HID light system kit include? 
Every one of our kits is made from OEM grade materials
that have been DOT approved. We will supply you with all of
the necessary components and hardware to install this system
into your vehicle. Each kit includes: 2 direct plug-in XENON
H.I.D. lamps, 2 ballasts (transformer / igniter unit), all necessary
wiring, complete and easy to follow installation instructions
and wiring diagram.
What
should I do if want to get only High or Low Beam with HID Xenon?
what about if I want both?
First, I want to let you know, there is Singel beam
and Dual Beam Bulb(BI-Xenon) types.
a) If you car use one bulb to give High beam and another bulb
to give Low beam, that means you current bulb is Single beam
model, so it should be one of these types: H1/H3/H4/H7/H11/9004/9005/9006/9007/880/881.
You should buy the HID KIT accordding to your current bulb types.
While, one KIT can give you only High Or Low, if you want both,
you have to buy 2 sets.
b) If you car use one bulb to give both High and Low beams,
that means your current bulb have two filaments, or we called
it Dual Beam Bulb, so you should buy a BI-Xenon HID Kit, like
H4-3,9004-3,9007-3,H13-3. You should buy the Bi-Xenon HID
KIT accordding to your current bulb types. Bi-Xenon bulbs
are telescopic model, it can move so you can have one bulb
to give you High and Low. One set of BI-Xenon HID KIT can
give you both High and Low with HID.
c) There is another bulb type, H4-2, this kind of bulb is
similar to H4-3, it can give you both High and Low beam, but
one of the beam is halogen, another is HID. If you car use
H4 type bulb to give both High and Low, you can buy H4-2 or
H4-3 HID KIT.
Why can
I not just replace the halogen bulb in my vehicle with XENON
HID lamps with out having to purchase the entire kit?
Motorcycles and automobiles currently use a 12 Volt electrical
system for their headlamps. XENON HID lighting systems require
over 20,000 volts to ignite the bulbs. Once lit, they only
require 85 volts to keep running. Our kits include a power
pack that is necessary for the lamps to turn on. The input
of the power pack is 9-16 volts. It is an integral part of
the system. You DO NOT require
any additional components to install the XENON HID lamp into
the original socket of the halogen bulb.
Could
I not just purchase a stronger watt halogen bulb to get a
brighter light?
XENON H.I.D. lamps are 35 watts while traditional halogen
bulbs are 55 watts. Even though XENON H.I.D. lamps draw less
current, they produce 3 times the light output as the higher
wattage halogen bulbs. Increasing the wattage will make the
bulb a little brighter but still much dimmer that the XENON
HID lamps. Also, AMPS = (BULB WATTS X 2) / BATTERY VOLTAGE
OUTPUT (12). So as you increase the wattage on your bulb you
increase the current draw on your entire electrical system.
This is critical in motorcycle applications.
What model
of HID Kits should I buy?
In a word, you shuold buy the HID KIT which match your current
bulb type.
we suggest you to check it on http://www.sylvania.com/ConsumerProducts/AutomotiveLighting/LampReplacementGuide,
http://www.gelighting.com/eu/product_portfolio/automotive/manufacturers,
the manual of your car, take a look at your current bulbs
or ask some local shops..
Could I Install
the kit myself?
For anyone who is mechanically inclined, this installation
is considered "do-it-yourself". While a typical
installation takes approximately an hour, it can vary depending
on application (conversion or auxiliary). Our kits are ready
to install right-out-of-the-box and come complete with everything
that you will need. We also provide you a full set of easy-to-read,
step-by-step instructions to guide you.
What is colour
temperature?
Many people believe that the higher the colour temperature
the brighter the lamp. This is totally wrong. The colour temperature
is purely a scale to measure the colour of the light output.
It is a reference purely for colour and could equally be called
White, Green or Blue. The reality is the higher up the scale
the lamps are the less bright they become. 5200K lamps are
approx 10% brighter (measured in Lumens, not degrees K) than
the 7000K. If you want lighting performance the 5200K HID
lamps are the best. In our opinion 7000K has the best and
most attractive light output.
Degrees K = ONLY COLOUR
Lumen= BRIGHTNESS
What
is the difference between genuine XENON HID lights and Xenon
gas-filled bulbs?
High Intensity Discharge (H.I.D.) is a type of lighting technology
that replaces the filament of the light bulb with Xenon gas.
The gas is ignited to produce an arc of light, when high voltage
is applied. The amount of light output is three times that
of a standard halogen bulb. The lamps also glow at a higher
light temperature (closer to natural sunlight) that gives
it its distinct color and appearance.
Other companies produce halogen bulbs that are gas-filled.
They still have a filament as they are halogen technology,
but the gas gives the bulb a bluer color when lit. Xenon-filled
halogen bulbs produce little or no more light output than
standard halogen bulbs of the same wattage.
"It should be noted that halogen technology is not comparable
to the Xenon discharge technology, fitted as original equipment
to more and more of the world's finest cars. " - Philips
DO NOT BE FOOLED BY COMPANIES THAT
OFFER HID-LOOK BULBS!
They are not a true XENON H.I.D. light system.
How
Bi-Xenon can give me both High/Low with HID Xenon?
Bi-Xenon bulbs are telescopic model, it can move so you can
have one bulb to get both High and Low and both of them are
Xenon HID.
While there is also a bulb type, H4-2, this kind of bulb is
similar to H4-3, it can give you both High and Low beam, but
one of the beam is halogen, another is HID. If you car use
H4 type bulb to give both High and Low, you can buy H4-2 or
H4-3 HID KIT.
How long will
these bulbs last?
HID XENON lamps are designed to last for the life of your vehicle.
They will run for over 2000 hours. Our lamp kits and bulbs are
made of the finest materials available.
Could I re-install
the original halogen bulbs after the XENON H.I.D. kit has been
installed?
With the growing popularity of leasing vehicles, a big concern
is whether or not you can bring the vehicle back to its original
factory condition. Our kits install with little or no modifications
to your vehicle. If need be, the entire kit can be removed and
the original halogen bulbs replaced. This kit can be re-installed
into another vehicle that uses the same bulb size.
Will
I lose the ability to use the High beams?
All originally supplied XENON H.I.D. lighting systems from automotive
manufacturers use a dual bulb configuration for High and Low
beam. A traditional halogen bulb is used for the High beam while
a XENON H.I.D. lamp is utilized for the Low beam. Our kits are
intended to replace the Low-beam components of the lighting
system while still keeping the High beam halogen bulb fully
operational.
Some vehicles use a single halogen bulb for both the High
and Low beam (like H4). We offer a kit for these vehicles
as well, but the functionality of the High beam is eliminated.
We are also offering the Dual Beam / Hylow H4 kit where both
High and Low beam are preserved.
An alternative to this is to use the low beam H4 kit and
install the XENON HID light system kit into the auxiliary
lights of your vehicle. This way, you will still have full
High beam functionality and will increase the effectiveness
of your auxiliary lights.
Are these XENON
HID light systems street legal?
Every country and jurisdiction has its own rules and regulations
governing the use of automotive lighting. XENON H.I.D. lighting
systems that are supplied with the vehicles from the factory
are DOT / E approved. Our kits are also made by the same OEM
manufacturers that supply all the major car companies of the
world. NO XENON H.I.D. lighting system available from any
source is DOT / E approved if installed outside of the factory.
These kits are not street legal for use on public roads as
they are. As a result, we officially endorse the kit for exhibition
and off-road use and will only sell the kit to be used for
these purposes. We are not responsible for customers who violate
the terms of sale in which they will assume all responsibilities
for any unauthorized or unintended use other than exhibition
or off-road use.
Technical specification
| Lamp |
| Output |
35 W |
| Nominal voltage |
85 V |
| Nominal light output |
3.200 lumen |
| Operating temperature |
−40°C-85 °C |
| Lifetime |
>3000hours |
| High voltage converter and ignitor |
| Operational input voltage |
8−32 VDC |
| Maximum input current |
8 A |
| Minimum voltage loaded (lamp on) |
60 V |
| Maximum voltage loaded (lamp on) |
120 V |
| Output voltage from ignitor |
| Nominal voltage |
23.000 V |
| Minimum voltage |
18.000 V |
Quality of the Product
Our company focuses on producing HID Kits, which are
JAPAN OEM, we do lots of OEM orders for famous brands. In fact many HID
Kits have a label "Made in Japan/Germany" are all
made by our factory. As we sell over 10000 Kits per month, so
the quality of our product is very good and guaranteed, you
will get warrantee for 14 months. So be confident with our products.
We printed "MADE IN JAPAN" on our HID Kits.
Warrantee
14 Months warranty directly with our company !
The ballasts and bulbs comes with 14 Months warranty from all
factory defects. If any component fails within warranty period,
we will replace the defective component immediately. Contact
us with a description of the problem and we will be happy to
assist.
Shipping and TAX
ALL ORDERS ARE DELIVERED IN 2 - 5 BUSINESS
DAY EXPRESS WORLDWIDE.
We use EMS,DHL,TNT to deliver the product to you. As EMS is
a very good courier which have good connection with the customs.
We declare the KIT as a gift or samples with $19.88 for each
kits, so you won't need to pay for the TAX or VAT at all.
If the package gets lost we will ship another one immediately.
We process orders during business days only: Monday through
Friday.
Please provide your phone number during checkout. Failure to
do so may result in shipping delays.
We do not ship to PO Boxes. Physical address is needed.
Installation
Plug and Play unit. 30~40 minutes
for a beginner
This is a plug & play unit. Simply replace your factory
bulbs with Our Xenon bulbs, plug the bulb to the ballast, and
the ballast plugs to the factory OEM harness. No cutting, rewiring,
or any other modifications needed.
If you are skeptical of the installation process, please contact
us for assistance
Easy installation (30~40 minutes for a beginner).
Policy
We can only issue an exchange if the item is received defective
or incorrect item shipped.
We reserve the right to cancel any transaction.
All presumed defective or wrong items must obtain a Return Authorization
Number before returning. We will ship your replacement once
we receive your returned item.
Buyer is responsible for all shipping costs and any other charges
by the courier company. This includes warranty claims.
Payment Method
Our business bank account is registered in CITI N.A. New York.
Our Paypal business account is over 7000 credit points.
Please be confident with our product and making the payment to us
1.You can pay by Western Union, http://www.vvme.com/western_union.jsp for detail.
2.You can pay by Bank Transfer, http://www.vvme.com/bank_transfer.jsp for detail.
3.You can pay by Paypal or Credit Card at our webpage http://www.vvme.com/payment.jsp
4.Online order through our website and make the payment by Paypal or Credit Card |
Company
